A brand needs units that are not the standard. A dealer wants a piece on the floor. A photographer needs a clean unit. A sales meeting needs something people can handle. Those pieces are useful, and they are easy to confuse with the unit production has to match. This note is how to keep them apart.

OKTOP FITNESS, legally Oktop (Nantong) Sports Technology Co., Ltd., is a trading company in Nantong. We can ask a partner factory for an extra unit when the program names the job. We do not build the equipment, and we do not keep a showroom that stands in for your reference. The sealed production unit is a different object. How it is sealed, and who holds it, is the golden-sample note. This note covers every other unit that looks like it.

Name the job before the unit is made

Write the job on the request, as its own line, before "send a sample" is treated as one thing.

  • An approval sample, which may become the sealed production reference if you sign it for that purpose.
  • A photo unit, finished well enough to photograph, and not required to stay sealed.
  • A showroom or dealer unit, which will be handled, moved and worn.
  • A meeting unit, which leaves your building and may not come back in the same condition.

"Send three samples" does not say which of these you mean. If one piece must do two jobs, write that down. A photo unit that will later sit on a floor is a showroom unit. It should not also be the sealed reference. The approval path is the sample-to-shipment note. Do not add a showroom job to that path on the same line.

Label the unit so a later reader can tell

When a unit that is not the reference leaves the partner factory, label it with the code, the job, and a line that it is not the production reference. The label has to survive the trip. A sticker that falls off in a showroom is how that unit later gets treated as the standard.

Photograph the label with the unit, and file it with the artwork revision that unit carries. If the photo unit was finished before the artwork was signed, write that the artwork is not yet approved. The marking note is where the artwork is decided, and the customization page is the short form. The label has to say the job, not only the brand name.

Keep wear out of the specification

Scuffs, a swapped handle, a pad a dealer preferred, or a carton that was opened do not change the code unless you raise them as a change. When someone prefers the floor piece, write a request and sample it, using the specification change note. Do not tell the partner factory to match the showroom. That unit is not a controlled copy.

If the showroom unit is damaged, do not replace it with the sealed reference. Ask for another showroom unit, or retire the display. Opening the production reference to fill a sales gap ends the custody the golden-sample note is there to protect.

Decide who may take a unit away

Name who may remove a photo unit or a showroom unit. Log who took it, the date, and whether it is expected back. A unit that will not return can still be displayed. It cannot later be treated as evidence of what was approved. Evidence stays with the signed record and the sealed reference.

OKTOP does not write that log for you. If a photo unit is held for a shoot, say what happens to it afterwards. That is custody of a photo unit, not of the production reference, and it is not a showroom at the Nantong office.

A photograph helps a team remember a finish. It does not replace the sealed unit or update the sheet. If the picture and the reference disagree, the reference wins while it exists. Tell a photographer which unit they may use, and whether a label or a carton may come off for the picture. Mark the unit altered if the styling stays. An altered unit is not what production is compared with.

A short separation checklist

  • Each extra unit has a job written before it is made: approval, photo, showroom or meeting.
  • The production reference is labeled as the reference. Every other unit is labeled as not the reference.
  • Artwork on a photo unit is marked approved or not yet approved.
  • Wear and dealer preferences on a showroom unit do not rewrite the code.
  • A log says who took a unit away, and whether it comes back.
  • Photographs stay in the sales file, not in the release file.

Questions brand owners ask about showroom units

Can the unit we photograph also be the golden sample?

Only if you accept that it stays sealed, labeled and out of the shoot once it is signed. A unit that will be styled, handled or left on a floor should be requested as its own piece. Do not give one unit both jobs.

Does a showroom unit approve a color or a mark?

No. Approval is the signed record on the approval sample. A showroom unit can carry the approved finish. It does not create the approval, and a change someone prefers on the floor is a new request.

Will OKTOP store showroom units for the brand?

Only when the program says so, and only for the job you named. Say what the units are for and what should happen to them afterwards. A unit held for photographs is not the production reference.

If you need a photo unit or a floor piece as well as the approval sample, say which job each unit has. The OEM / ODM path shows where sample approval sits, customization is where the finish on that unit is decided, and common questions are on the FAQ.