A private-label line often starts with something the brand owner made: a drawing, a handle shape, a logo position, a carton dieline, or a mold that was paid for once and should serve only that brand. This page is how a brand owner should put those things on paper before they travel, who may see them, and what to ask about tooling before the first order is released.
OKTOP FITNESS, legally Oktop (Nantong) Sports Technology Co., Ltd., is a trading company in Nantong. We work with a network of partner factories. We do not build the equipment ourselves. That matters here, because a design sent to us may need to reach a partner factory to be quoted or sampled. The OEM / ODM path shows where that handoff happens, and the first brief is usually the first time a drawing changes hands.
Decide what is actually yours
Before you send anything, list what you consider brand property. Keep the list concrete. A useful list names each item and says what it is:
- Drawings or 3D files you created or commissioned, by file name and version.
- A modified geometry, grip, pad shape or color that is not part of a standard catalog code.
- Artwork, logo files and carton dielines prepared for your mark.
- Any mold, plate, die or fixture made only for your line, once it exists.
- Commercial information: your customer names, target prices, and sales plans.
A standard catalog part with your logo printed on it is not the same as a new design. Be honest about which lines are OEM work on an existing code and which are ODM or custom work, as described in the matching note. The protection you ask for should fit what you are really handing over.
Put confidentiality in writing before files travel
Ask for a written confidentiality agreement before you send drawings or customer information. Keep it readable. It should say what counts as confidential, who may receive it, what it may be used for, how long the obligation lasts, and what happens to the files when the project ends.
When a trading partner is between you and a partner factory, ask how the obligation reaches the plant. The practical question is simple: if your drawing is sent to a partner factory for a quote, is that factory bound by the same terms, and is that written down? A good answer names the route. It does not ask you to rely on trust alone.
Send only what each step needs. A first quotation can often be prepared from a drawing with outer dimensions, material and marking, without the full set of production files. A complete file pack can follow once a partner has been matched and a sample is planned. Mark every file with your brand name, the version and a confidentiality line, so that a copy found later can be traced.
Ask about tooling before it is made
Tooling is where most later disputes start. When a new mold, plate or die is needed, ask these questions before you approve the cost, and keep the answers on the quotation or in a short written note:
- Who pays for the tool, and is the charge separate from the unit price?
- Who owns the tool once it is paid for?
- May the tool be used for anyone else's goods? The usual brand-side position is no.
- Where will the tool be kept, and will it be identified as reserved for your line?
- What happens to the tool if you stop ordering, or if you move the line to another supplier?
A quotation that carries a tool charge with none of those answers is incomplete. Ask for them before you sign the sample, not after the first shipment.
If the tool cost is shared, or recovered through the unit price, say so clearly. Ownership and use can be agreed in different ways. What matters is that the agreement exists and that both sides read it the same way.
Keep marking and artwork under one owner
Your mark is protected best when one person on your side controls it. Name one owner for logo files, color references and carton dielines. Send files only from that owner. When a file is replaced, say which version it replaces, so a partner factory does not keep printing an old file.
The customization page is where marking, color and pack are decided. The marking and packaging note covers how to describe them. From a protection point of view, add one more rule: approved artwork should be used only on your orders. Ask that unused printed cartons, labels and plates are not sold off or reused for other buyers.
Check registrations on your side
A brand owner should check its own trademark and design registrations in the markets where it sells, with its own adviser. OKTOP does not give legal advice and will not claim protection that a brand has not registered. What a sourcing partner can do is keep your files controlled, keep your tool reserved as agreed, and keep your mark off goods that are not yours.
What to do if you see a problem
If you see goods in the market that look like your design, collect facts before you write: where you saw them, photos, the date, and any marking or carton detail. Compare them with your signed sample and your dated drawings. Then raise it in writing with your sourcing partner and ask what route the files and the tool took. Dated records on your side are what make that conversation useful.
A short checklist before the first sample
- A written confidentiality agreement is signed before drawings or customer details are sent.
- Each file carries the brand name, a version and a confidentiality line.
- The route from trading partner to partner factory is written down.
- Tool payment, ownership, storage and use are recorded on the quotation or in a note.
- One person owns artwork and dielines on the brand side.
- Unused printed packaging is not reused for other buyers.
If you are preparing a design-led line and want to discuss how files and tooling should be handled, contact the desk. Company facts for OKTOP are on the about page, and common questions are answered on the FAQ.
