A logo file is not a decoration method. A dumbbell end cap, a molded plate, a stitched pad and a painted frame do not take a mark in the same way, and a brand color shifts between rubber, coated steel and upholstery. This note is the decision list OKTOP uses with partner factories before a private-label line is released. OKTOP is the trading desk. The partner factory makes the part.
The method a given code can accept is not a menu on this site. It depends on the product and the customization. Ask us for a quote. Until the partner confirms a method on the selected code, treat every process named in a meeting as a candidate.
Logo: placement first, method second
Decide where the mark must be visible, then ask which method that surface allows. Typical requests, which still have to be confirmed per code, are:
- A printed or transferred mark on a flat plastic or rubber face.
- A mark pressed into a molded part, which usually requires a dedicated tool.
- A metal badge or a printed plate fixed to a frame.
- A sleeve label or an end-cap label where the bar or handle cannot take ink.
- A sewn or transferred mark on upholstery, which has to survive cleaning.
- A carton and a manual that carry the brand even when the product itself has a small mark.
Write the request as "logo visible on the end of the dumbbell when it sits on a rack", not as a process name. The partner factory should answer with the method, the maximum size, the colors the method can hold, and whether a new tool is required. If a tool is required, agree in writing who pays for it and whether other brands may use it. That agreement is part of the sample file, not a side email.
Send vector artwork and a single-color version. A photograph of a shop sign is not artwork. If you have a minimum size, state it in millimetres.
Color: approve a part, not a screenshot
Pick the products where color is a brand signal. Plates, dumbbell heads, kettlebells, pads and frames are the usual ones. Handles and hardware often stay as the catalog builds them, because changing them does not help the dealer and can change the part number.
For each colored item, send a physical reference or a color code your coating shop already matches. Ask for that reference on the real substrate. Rubber, paint and vinyl do not reflect light the same way. Approving a screen swatch and then rejecting the sample wastes the cycle.
State whether the color is for the whole family or only for selected weights. A ladder that changes color by weight is a different packing plan from a family in one color with a printed weight number. Also state which parts must match when they sit together, such as a bench frame and its plate rack. A color change after approval is a new sample, not a note on the carton.
Materials: change only what the brand can explain
Most private-label lines should keep the catalog material and change the surface. A different rubber, leatherette or bar finish can alter wear, weight and the way a logo sits. Mark that line as a development item for the partner factory. Ask what will be checked before the new material is used on an order. Do not describe that check as a certificate. Agree the checks for your order in the quotation.
If two weights in one set use two compounds, the brand sheet should say so. If they must match, the sample set has to include both weights.
Packaging is part of the product
Decide the pack before artwork, because the artwork size follows the carton. The usual choices are:
- An export carton that protects the product and carries a shipping mark, with no retail face.
- A dealer carton with the brand, the code and a short contents line, still strong enough for a container.
- A retail carton with a barcode, a contents list and the warnings your market requires.
- A set carton that holds a pair or a weight ladder, plus an outer carton for freight.
Tell us which barcodes you will supply and which language blocks must be printed. A manual in the wrong language is a packing defect even when the product is correct. If you need a hanger, an insert or a spare-parts bag, add it to the pack list so it is costed and checked.
Carton strength and print depend on the product. Ask us for a quote. Send a dieline if the brand already has one. If the partner must draw the dieline, say who approves it. An unapproved dieline should not be printed to chase a ship date.
Also decide what the carton must not say. A line on a retail face is still a claim. Do not ask anyone to invent one.
Lock a single reference
Before the order is released, the brand file for each code should hold:
- The approved artwork and the method.
- The approved color reference on the real part, or a written note that the catalog color stands.
- The material note, especially if it differs from the catalog code.
- The approved pack: dieline, barcode, language and contents.
- The sample identification, so a later shipment can be compared with the same sample.
A sample is available on request so this file is built from parts, not from slides. One person on the brand side should be allowed to approve it.
Where this sits in the order
Marking, color, material and pack are the middle of the OEM path, after the brief and before the partner factory is told to run the order. The company page explains what OKTOP coordinates and what it does not claim to build. The shipment note explains inspection, consolidation and the papers that should travel. Product buying guides for gym operators are on oktopsports.com. Keep the brand file here, with the codes you actually ordered.
